Follow the part datums. Trial-fit the specified Minifix B34 cams and bolts in an offcut, then drill with a jig and depth stops.
DIY cabinet designs / 01Your width. Your finish.
620 mm high · 450 mm deepYour width. Your finish.
Your bedside cabinet.
Two equal drawers, a clean full-width top, and boards cut and edged to fit. Choose your width and finish; the parts and assembly drawings update together.
Two drawers · floor-standingIllustrative finish preview
Make it yours
mm
350–460 mm, sized for the specified 400 mm drawer runners.
Uses the same live finishes and availability as the cut-and-edged configurator.
17 panels, cut and edgedLoading…
Including VAT, for collection. Delivery and your combined basket total are confirmed at checkout.
Boards for a DIY build
Supplied cut and edged. Cam/dowel drilling, runners, handles, fittings and assembly are not included. Download the guide to machine and assemble your boards.
Supplied cut and edged. Cam/dowel drilling, runners, handles, fittings and assembly are not included. Download the guide to machine and assemble your boards.
Your parts, calculated to fit
Finished sizes include edging. Length follows the grain on patterned finishes. At an invalid width the preview stays at the standard 450 mm; exports and ordering are disabled.
| Part | Qty | Length × Width × Thickness | Edging |
|---|---|---|---|
| A · Top | 1 | 450 × 450 × 18 mm | Long edge 1, Long edge 2, Short edge 1, Short edge 2 |
| B · Cabinet sides (left and right) | 2 | 602 × 422 × 18 mm | Long edge 1, Short edge 1 |
| C · Bottom | 1 | 414 × 422 × 18 mm | Long edge 2 |
| D · Decorative drawer fronts | 2 | 446 × 298 × 18 mm | Long edge 1, Long edge 2, Short edge 1, Short edge 2 |
| E · Drawer box sides | 4 | 400 × 220 × 18 mm | Long edge 1 |
| F1 · Drawer box fronts | 2 | 352 × 220 × 18 mm | Long edge 1 |
| F2 · Drawer box backs | 2 | 352 × 220 × 18 mm | Long edge 1 |
| G · Applied back | 1 | 602 × 450 × 8 mm | None |
| H · Applied drawer bases | 2 | 388 × 400 × 8 mm | None |
Drawings that move with your width
Cam-and-dowel joints in 18 mm board; screw-fixed 8 mm back and bases. Hole coordinates below update from the same design as your cutting list.
Top
Rear-left underside; x left to right, y rear to front
Dimensions: 450 × 450 × 18 mm. Face and outer-face centres are plotted together; drill from the face named in each row. Coordinates are millimetres. Edge drills use the thickness datum in the note.
| Hole / face | x, y | Ø / depth |
|---|---|---|
| BOLT Underside | 9, 58 | 5 / 12 |
| BOLT Underside | 9, 380 | 5 / 12 |
| BOLT Underside | 441, 58 | 5 / 12 |
| BOLT Underside | 441, 380 | 5 / 12 |
| DOWEL Underside | 9, 122 | 8 / 12 |
| DOWEL Underside | 9, 316 | 8 / 12 |
| DOWEL Underside | 441, 122 | 8 / 12 |
| DOWEL Underside | 441, 316 | 8 / 12 |
A straightforward assembly
Join bottom, sides and top with cams and dowels. Square the cabinet before screw-fixing the back.
Join the box ends between the sides. Square and lock the cams, then screw the bases underneath.
Install the specified runners, set 2 mm front gaps, fit handles and secure the unit with an anti-tip restraint.
The downloadable guide specifies Minifix 15 cams for 18 mm board, B34 bolts, 8 × 30 mm dowels, Accuride DZ3832-0040DO runners and 96 mm handle centres. Check your actual fittings before drilling.